Glovebags and Containments

Quality and customization

Glovebags and Containments

Glovebags are flexible containments that enclose a contaminated item or form a small work area to confine the spread of contamination. Glovebags allow work to be performed on potentially contaminated items by personnel wearing a minimum of protective clothing. Access to the glovebag interior via gloved sleeves enables repairs or manipulations without directly contacting contaminated surfaces. Lancs makes a wide variety of glovebags with different configurations and dimensions. These designs have been developed throughout many years of experience with the U.S. Navy nuclear program, electrical utilities, and DOE lab facilities.

Review the following standard glovebag designs for one that fits your needs. Lancs can produce almost any unique configuration to meet your project needs.

The glovebags shown are fabricated with the following general characteristics:

  • 12 mil or 20 mil clear PVC or Polyurethane, fire retardant
  • 8 mil or 12 mil translucent yellow PVC or Polyurethane, fire retardant
  • 1" dia disk with light duty injection molded PVC eyelet
  • Assembled by means of radio frequency heat sealing to ensure highest quality construction. Inflation pressure tested to verify containment seam integrity.
  • Note: Images show sleeves with sealed ends for illustrative purposes only. Actual items have open sleeves.

LI-300-BOB

1_CGT_Product_LI-300-BOB

Description

  • Bag-In/Bag-out Bag with internal mitts/gloves. Various sizes, diameters and lengths. Made from PVC or Polyurethane.
  • Flexible HEPA filter option if required.
  • The bag in/out bag has shock/bungee cord located in the hem of the open end that fits into a rib around the bagging ring/port of the filter housing.
  • When the door is opened/removed, the bag provides a barrier between operator and contaminated filter
  • Each bag includes 3ea built-in glove sleeves/mitts to facilitate the filter change

LI-300-363624

Description

  • Glovebag, 36″L x 36″W x 24″H
  • Press-lock zipper or Velcro Split running length of bag
  • Tie-offs welded around perimeter for securing to frame
  • 1 set of glove sleeves and dump sleeve on 2 sides
  • Includes 2 pass-out ports
  • Splits around pipe or ducting for continuous cutting/working
  • Materials: PVC or Polyurethane
2_CGT_Product_LI-300-363624

LI-301 Single Chamber Work Containments "Doghouse Glovebag"

3_CGT_Product_-LI-301DoghouseGlovebag

Description

  • 27"H x 39"L x 24"W
  • 18" dia transfer sleeve
  • 14" x 16" access flap
  • 7 2" dia service sleeves
  • sets of glove port access sleeves

The "Doghouse" has become an industry standard and is widely used for assembly, maintenance, and repair work. Easy-to-use access ports and useful dimensions make the doghouse a popular ALARA tool. The LI-301 glovebag is used in conjunction with an external frame (LI-301F) and aluminum drip pan for support. The frame and glovebag assembly can also be mounted on a wheeled mounting frame for mobility.

LI-301F Doghouse Glovebag External Frame And Drip Pan

Description

  • The LI-301 can also be used with an aluminum transfer cylinder (LI-433) sized to fit the 18" transfer sleeve and attached directly to the external frame.
  • When fitted with 20" dia PVC sleeving (LI-620), objects can be securely transferred into or out of the Doghouse assembly.
4_CGT_Product_LI-301FDoghouseGlovebag

LI-302 Glovebag

5_CGT_Product_LI-302-Glovebag

Description

  • 16" dia body with 15" high work chamber
  • 36" x 42" bottom flange flap with closure zipper
  • 12" zipper access opening
  • 2 pair of glove sleeve ports on side of chamber
  • 1 pair of glove sleeve ports on top of chamber
  • For use on large curved or flat surfaces. Bottom flap provides area to seal around work site for easy installation. Adequate space for small power tool operation. Can enclose pipes up to 12" dia size.

LI-303 Glovebag

Description

  • 24" dia body with 15" high work chamber
  • Installation sleeve for 4" or 9" dia mount
  • 12" zipper access opening
  • 2 pair of glove sleeve ports on side of chamber
  • 1 pair of glove sleeve ports on top of chamber
  • Bottom installation sleeve used for mounting onto fixed components. Adequate space for power tools. Designed for 2 person work.
6_CGT_Product_LI-303-Glovebag

LI-304 Glovebag

7_CGT_Product_LI-304-Glovebag

Description

  • 18" dia body with 24" long work chamber
  • 8" dia installation sleeves on both ends
  • Presslock zipper or Velcro closure runs length of bag
  • 12" zipper access opening
  • 1 pair of glove sleeve ports on each side of chamber
  • Splits in half to close around continuous piping run for installation.

LI-305 Glovebag

Description

  • 18" dia body with 15" high work chamber
  • Installation sleeves on bottom for 4" or 8" dia mount
  • 12" zipper access opening
  • 2 pair of glove sleeve ports on side of chamber
  • 1 glove sleeve port on top of chamber
  • Bottom installation sleeve can be fit to 2 different diameters for mounting onto fixed components. Top sleeve can be used for vent/filter or glove access.
8_CGT_Product_LI-305-Glovebag

LI-306 Glovebag

9_CGT_Product_LI-306-Glovebag

Description

  • 16" dia body with 15" high work chamber
  • 24" x 48" bottom flange flap with closure zipper
  • 12" zipper access opening
  • 3 glove sleeve ports on side of chamber
  • 1 glove sleeve port on top of chamber
  • Bottom flange flap enables installation around components in long continuous run work site. Good for total enclosure on pipe or valve body up to 8" diameter.

LI-307 Glovebag

Description

  • 46" long chamber with Velcro or zipper closure around 3" dia installation sleeves
  • 10" dia body with 1 glove sleeve access port on each end
  • 2 pair of glove sleeve ports on each side of chamber
  • 2 service sleeves
  • 12" chamber access zipper
  • For use on continuous pipe components up to 3" diameter. This versatile design has features that provide flexibility for many possible applications and configurations.
10_CGT_Product_LI-307-Glovebag

LI-308 Glovebag

11_CGT_Product_LI-308-Glovebag

Description

  • 12" dia body with 9" high work chamber
  • Installation sleeve on bottom for 5" dia mount
  • 2 glove sleeve ports on side of chamber
  • 1 glove sleeve port on top of chamber
  • 1 service sleeve
  • Good for use on small components on location. Installation sleeve can be oriented for mounting on top of component or sideways access to component.

LI-309 Glovebag

Description

  • 11" x 16" flange flap with closure zipper
  • Single glove sleeve port for access to work chamber
  • 9" access zipper and 1"dia service sleeve open to chamber
  • Best for use on flat or contoured surfaces to provide protection while working on or operating contaminated valves or gauges.
12_CGT_Product_LI-309-Glovebag

LI-310 Glovebag

13_CGT_Product_LI-310-Glovebag

Description

  • 24" dia body and 15" high work chamber w/12" access zipper
  • Installation flange on bottom for 11-1/2" dia mount
  • 2 glove sleeve ports on top of chamber
  • 4 glove sleeve ports on side of chamber
  • 1 support ring
  • For installation on piping or other elongated items.

LI-311 Glovebag

Description

  • 30" dia body and 18" high work chamber w/12" access zipper
  • Dual installation sleeves on bottom: concentric 4" dia and 9" dia
  • 2 glove sleeve ports on top of chamber
  • 4 glove sleeve ports on side of chamber
  • Multiple size access sleeves for flexible use on different diameter piping systems.
nuclear-plant-placeholder

LI-312 Glovebag

15_CGT_Product_LI-312-Glovebag

Description

  • 24" dia body and 15" high work chamber w/18" access zipper
  • 12" dia installation sleeve on bottom
  • 5 glove sleeve ports on side of chamber
  • 1 access sleeve port on top
  • 1 support ring
  • For mounting over large valve with offset installation sleeve to allow for shelf in chamber for tools on one side.

LI-356 Catch Containments

Description

  • LI-356 12" dia
  • LI-357 15" dia.
2_CT_Product_LI-356-Catch-Containments

LI-351 – LI-355 Catch Containments

1_CT_Product_LI-351-LI-355-Catch-Containments-

Description

  • LI-351 14" dia
  • LI-352 18" dia
  • LI-353 24" dia
  • LI-354 36" dia
  • LI-355 48" dia

Control contamination

Learn more about our wide variety of glovebags with different configurations and dimensions.