corner
corner
LANCS INDUSTRIES
Providing radiation shielding products and solutions since 1974.
catch containments, containment and tent accessories
 
Glove Bags, Miscellaneous Bags, Containments
Catch Containments, Containment and Tent Accessories

 
For use under components to capture drips or leaks, Catch Containments (also Drip Bags, or Drip Pockets) can help prevent the potential spread of contamination.

Lancs manufactures catches in two basic styles: Cylindrical and Conical.

Catch containment bodies are made using 20 mil thickness PVC or Polyurethane. A 1/2" aluminum support ring is sealed into the rim to form the shape of the catch. The ring is flexible, enabling the containment to conform to irregular surfaces or tight spaces. Tie-off loops permit the catch containment to be suspended from nearby components for installation. Catch containments can be filled with absorbent material to control leaking fluid, or fitted with a drain line.

Catch containments can be ordered in yellow for radiological use, or clear body with green rim and tabs for non-radiological use.

Please specify color when ordering.
 
         
    LI-351 – LI-355 Catch Containments

LI-351 14" dia
LI-352 18" dia
LI-353 24" dia
LI-354 36" dia
LI-355 48" dia
 
         
 
         
    LI-356 Catch Containments

LI-356 12" dia
LI-357 15" dia
 
         
 
 
         
    LI-300-POP-6×6

  • Pass-out Port/Swipe Box, 6″ x 6″ x 6″ with 2ea 4″ x 4″ opposing door openings, on 8″ x 8″ flange. Made from PVC or Polyurethane.
  • Add this feature to your custom tent or glovebag design or install onsite with adhesive glue and/or tape.
 
         
 
         
    LI-300-PATCH KIT

  • Patch/Repair Kit for glovebags and small containments
  • Used to repair small nicks, tears or cuts in glovebags or small containments
  • Includes the following:
  • 6″ x 12″ piece of 20 mil transparent clear PVC
  • 6″ x 12″ piece of 8 mil translucent yellow PVC
  • 6″ x 12″ piece of 14 oz Yel/Wht PVC laminate
  • 6″ x 6″ piece of reinforced tape
  • 4 oz can of HH-66 adhesive glue
 
         
 
         
    LI-300-MOD KIT

  • Modification Kit for glovebags and containments
  • Used to make modifications or repairs to existing glovebags and containments
  • Includes the following:
  • 12″ x 27″ piece of 20 mil transparent clear PVC
  • 12″ x 27″ piece of 8 mil translucent yellow PVC
  • 12″ x 27″ piece of 14 oz Yel/Wht PVC laminate
  • 6″ x 6″ piece of reinforced tape
  • Pint can of HH-66 adhesive glue
  • 5ea small yellow tie-offs
  • 5ea plastic snap grommets
  • 18″ length of 1″ adhesive-backed Hook & Loop
  • 12″ length of press-lock zipper attached to 14 oz Yel/Wht Laminate
  • Also available in Polyurethane
 
         
 
         
    LI-300-FP

  • Filter Pouch. Used for allowing air into tents and large containments. Adjustable via Hook & Loop front door.
  • Standard materials: PVC laminate and PU Laminate, screen mesh and 1/2″ thick reticulated foam
  • Standard size is 1′ x 3′. Additional sizes to your requirements are available upon request.
  • Add this feature to your custom tent design or install onsite with adhesive glue and/or tape
 
         
 
         
    LI-300-FS

  • Flanged Sleeve, Round. Used when an additional penetration into containment is needed onsite.
  • Attach to glovebag or containment tent with tape and/or glue. Available in various sizes. PVC or Polyurethane
 
         
 
         
    LI-300-FGS

  • Flanged Glove Sleeve, Oval-Shaped. Used when an additional glove sleeve into containment is needed onsite.
  • Attach to glovebag or containment tent with tape and/or glue. Available in various sizes. PVC or Polyurethane
 
         
 
Products