| supplies and accessories |
| |
1, 2
The external frame used to support a work tent is an integral part of the tent design. Spacing and location of frame pieces must be planned in a way to ensure a solid tent structure while avoiding interference with tent access or service features.
Lancs uses 1 inch Schedule 40 galvanized steel pipe to fabricate tent frame pieces. Frame members are joined with fittings made of ASTM A47 Grade 32510 heavy duty cast iron. Pipe and fittings are custom made to accommodate any necessary shape and angle.
Tie-offs are heat sealed to the exterior of tent walls at points running along frame positions. Nylon tie wraps are commonly used to fasten a tent to its frame.
|
| |
|
|
|
|
| |
 |
|
LI-401 – LI-404 Tent Frames
LI-401:
Frame for LI-360-A
LI-402:
Frame for LI-361B
LI-403:
Frame for LI-362
LI-404:
Frame for LI-363
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-410 Glove Ring
- Rigid plastic with rubber retention ring
- Available in yellow, magenta, or black color
- Used to secure Anti-C gloves to containment sleeves
LI-410-4 4-1/2" ID
LI-410-5 5-1/2" ID
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-411 Glove Clamp
- Stainless steel band with worm screw
- Used to secure Anti-C gloves to glove rings
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-412 Anti-C Gloves
- Available in sizes 9, 10, or 11 with cuff length 12", 15",
or 18"
- Used for anti-C wear or containments
- Latex, launderable and incinerable
|
Size
|
12"cuff
|
15"cuff
|
18"cuff
|
|
9
|
LI-412-912
|
LI-412-915
|
LI-412-918
|
|
10
|
LI-412-1012
|
LI-412-1015
|
LI-412-1018
|
|
11
|
LI-412-1112
|
LI-412-1115
|
LI-412-1118
|
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-414 HEPA Filter, 30-40 CFM
Description: Rigid PVC housing with galvanized wire mesh caps on both ends
Air Flow: Rated from 30 CFM to 40 CFM
Dimensions:
Filter Media:
- 99.97% efficiency @ 0.30 microns
- Each unit individually DOP tested
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-415 Filter Assembly
- 2 CFM filter (LI-415) with 2 rubber washers, 1 rigid disk
washer, and threaded retainer plug
- Used to vent glovebags and small containments
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-416 HEPAFilter, 2 CFM
- Plastic housing with 3/4" NPT
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-417 HEPAFilter, 3 CFM
- Metal housing with 1-3/64" thread
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-418 Poly Bottle Adaptor
- Threaded for 3/4" NPT attachment
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-419 Poly Bottle Adaptor
- Threaded for 1-13/64" male attachment
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-420 Poly Bottle Adaptor
- Threaded for 1-13/64" female attachment
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-421 Drain Fitting
- Screen filter fitting with 2 rubber washers
- 1 flexible disk washer and threaded retainer nut
- Used to drain glovebags and small containments
|
Outlet sizes
|
Product number
|
|
1/2" ID tubing
|
LI-421-050
|
|
3/4" ID tubing
|
LI-421-075
|
|
1" ID tubing
|
LI-421-100
|
|
1-1/2" ID tubing
|
LI-421-150
|
|
2" ID tubing
|
LI-421-200
|
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-422 Thru-Wall Connector
- Plastic fixed flange fitting with 2 rubber washers
- 1 rigid disk washer and threaded retainer nut
- Used to penetrate walls of glovebags and containments
- For 1/2" ID hoses
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-423 Pinch Clamp
- Metal bracket with clamp plate tightened by threaded
thumb screw
- Used to stop/start flow in plastic tubing (3/4" OD max)
|
|
| |
|
|
|
|
|
| |
| |
|
|
|
|
| |
 |
|
LI-424 Hand Pump
- Plastic body, self priming
- 9" long x 1-1/4" dia
- Intake and outlet sized for 1/2" ID tubing
- Used to transfer fluid to/from Poly Bottles
Poly Bottle
- High density Polyethylene
- DOT certified
- 2" screw cap closure with 3/4" center
|
|
| |
|
|
|
|
|
| |
|
|
| |
